Av Ida Simon-Andersson, HR/Marketing Manager at Nordic Pack AB
You've found a supplier with the right price and fast delivery time – but is the packaging actually approved to meet the food you sell? The question arises in almost every purchasing process. This applies to glass jars for jam, plastic bottles for juice and buckets for bulk goods. The answer determines whether you can put the product on the shelf or risk an inspection visit that stops the delivery.
Food-approved packaging complies with the EU Framework Regulation 1935/2004 and the migration limits in Regulation 10/2011 for plastics. This means documented traceability, tested materials and correct labelling. In addition, a valid declaration of conformity (DoC) is required that follows the entire supply chain, from manufacturer to wholesaler and on to the retail level in Sweden.
It sounds abstract until you break it down into three parts that determine whether a deal passes or fails an inspection. The first part is the material itself – which chemical substances are allowed and in what quantity. The second part is the documentation that follows the material through every step. The third part is the labeling on the finished package, which is often forgotten until a chain store or a municipal food inspector asks for it.
The total amount of substances that may be transferred from a plastic packaging to the food must not exceed 60 mg per kilogram of food (European Commission, 2011). It is that kind of concrete limit value that determines whether a material can be used – not a general feeling that "the plastic seems safe".
The basis is Regulation (EC) 1935/2004, which applies to all materials that come into contact with food – glass, metal, paper and plastic. It states that no substance may be transferred to food in an amount that endangers human health or impairs the composition of the food.
For plastics, there is a more detailed regulation: 10/2011. It specifies exactly which substances may be used in manufacturing, which migration limits apply and how the material should be tested. For example, it is the difference between a PET bottle approved for juice and an industrial plastic that is sold cheaply but was never intended for food contact. Both regulations are continuously updated with new additions – latest in February 2025 – so the year in the name says nothing about how current the content is.
Glass and metal do not have as detailed an EU regulation as plastic, but are still covered by the framework regulation 1935/2004 and by national rules that the Swedish National Food Agency applies when checking. In Sweden, it is the Swedish National Food Agency and the municipalities that exercise supervision over food companies, while Swedac checks the quantity declaration of pre-packaged goods according to a separate set of regulations.
For B2B buyers who import packaging from countries outside the EU, there is an additional responsibility. The importer is considered the party that first releases the material onto the EU market. This means responsibility for ensuring that the documentation is available, even if the manufacturer is located in a country without corresponding legislation. It is a common pitfall when a Swedish company buys directly from a factory in Asia without an EU-based intermediary who has already ensured that DoC and material tests are in place.
A Declaration of Compliance is the document that actually proves that a plastic packaging is approved. It must be able to be displayed at all levels of trade except retail (Finnish Food Authority, 2025). If the document is missing when a control authority asks for it, it is the supplier and, by extension, the buyer who will be the one to blame for the problem.
A complete DoC must include the name and address of the manufacturer and issuer, as well as a description of the material. Annex IV to Regulation 10/2011 lists nine mandatory items that a DoC must include. These include confirmation that migration limits are met and any restrictions on use – for example, whether the material may only be used behind a so-called functional barrier. As a purchaser of packaging for food supplements or sauces, it is not enough to ask "is this approved?". The right question is "can I get the DoC for this particular article number, in the volume I order?".
A typical case is a food company that orders a new plastic jar for a spice mix. It is only during an audit that it is discovered that the DoC that came with it was for a different material composition than the one actually delivered. This type of discrepancy is exactly what an auditor is looking for, and the documentation must therefore match the item number – not just the product category.
No, the requirements differ between the materials, even though they share the same basic principle that nothing hazardous should be transferred to the food. Food-approved plastic packaging is most closely regulated because the migration risk is greatest and varies most depending on additives, dyes and recycled content.
Glass and metal are generally considered more inert, meaning they are less likely to leach substances into their contents. However, this does not mean that they are exempt from control. For example, a glass jar with a metal lid must meet the requirements for both materials separately. This is because the lid often has a plastic coating or a rubber gasket, which in turn is covered by the Plastics Regulation.
For cans and other metal packaging, documentation often deals with the paint or coating on the inside, not the metal itself. It is precisely at these interfaces between materials – lid to can, label to surface, coating to content – that documentation often fails. In theory, each component requires its own documentation, but in practice they are often purchased from different subcontractors without coordination.
This is one reason why full-service suppliers who work with multiple material types at the same time can provide a more secure purchase. The risk of a single layer in a composite packaging lacking documentation is reduced when one party is responsible for the entire item, from glass to lid to label. If you want to read more about material selection specifically for plastic, you can see our guide on plastic bottles for B2B, for glass jars our guide on glass jars for B2B, and for glass bottles for drinks our guide on glass bottles for beverage production.
Recycled plastic – often called PCR, post-consumer recycled – raises an additional question in addition to the usual migration requirements: where did the raw material come from and what contaminants may remain from the material’s previous life. The EU has therefore introduced a separate regulatory framework, Regulation (EU) 2022/1616, which specifically governs recycled plastic intended for food contact. The regulation requires a separate DoC according to Annex III.
In practice, this means that a bottle made with 30 percent PCR plastic is not automatically covered by the same documentation as a bottle made from virgin plastic, even if they look identical on the shelf. The facility that processes the recycled plastic must be approved for the purpose. Each batch must also be traceable back to its source. For a buyer who wants to profile themselves on sustainability, this is an issue that is often missed until a customer or an auditor asks for the supporting documentation.
A concrete example is a beverage company that wants to switch to PET bottles with recycled content to strengthen its sustainability profile. If the supplier cannot show a DoC according to the 2022/1616 regulation for the recycled plastic, there is a risk that the entire switch will have to be paused until the documentation is in place. This applies even if the underlying plastic type is otherwise correctly approved according to 10/2011.
The consequences are rarely escalated via a single written decision directly. First comes an injunction, that is, a demand from the municipality or the Swedish Food Agency to remedy the deficiency within a certain period of time. If the injunction is not followed, the authority can impose a fine – a financial pressure tool that becomes effective if the demand is ignored.
For administrative violations, such as insufficient documentation or incorrect labeling, the authority can also decide on a sanction fee without the matter needing to go through the prosecutor or court (Finnish Food Authority, 2026). In the case of more serious or repeated violations, there are also criminal sanctions in the form of fines or imprisonment under the Food Act. However, these cases occur less frequently and usually require intent or gross negligence.
For a B2B company, the practical risk is rarely the fee itself. What happens around is worse: a sales ban that stops an entire production batch, a customer demanding documentation before the next order, or an audit that has to be redone from scratch. These are costs in time and lost business that often exceed a possible penalty fee many times over. That is why the documentation should be ready before the order is placed – not after an authority has already opened a case.
In Sweden, it is the local municipality's food inspectors or the Swedish Food Agency, depending on the size of the business, who check that food businesses meet the requirements. The check includes that the packaging material is documented and traceable throughout the chain. It can come without warning, and then it is too late to start requesting documentation from your supplier.
During an inspection, it is common for the inspector to ask for documentation for a selection of the packaging used in production, not the entire range. This means that gaps in the documentation are often discovered randomly. A company may have correct documentation for nine out of ten packaging types but lack it for the one that happens to be inspected, which is still counted as a deviation in the protocol.
As a full-service packaging and logistics provider, we have seen the same pattern over and over again: it is rarely the material itself that is the problem, but the documentation was never included with the purchase in the first place. We have helped food manufacturers collect DoC, material specifications and test results for their entire packaging portfolio in a single document for regulatory inspections. This allows the buyer to respond immediately instead of chasing paperwork afterwards.
In practice, safe packaging purchasing is about asking the right questions before the order is placed, not after the product is already on the pallet in the warehouse. This is especially true when changing suppliers, where a lower price sometimes hides that food-approved packaging actually lacks complete documentation. The same logic applies when changing materials – such as when a company goes from virgin to recycled plastic without updating its DoC file at the same time.
Food-grade packaging must comply with the EU Framework Regulation 1935/2004 on material safety, and for plastics, also with the migration limits in Regulation 10/2011. In practice, this requires tested materials, correct labelling and a valid DoC that follows the article throughout the supply chain.
Ask the supplier for a Declaration of Compliance for the specific article number. The document should confirm that the material is within the migration limits and state any restrictions, such as the type of food the material can be used for.
Not always. Migration limits and suitability depend on the properties of the food, such as fat content and acidity. A package approved for dry goods is not automatically approved for fatty sauces or alcoholic beverages, as these simulate migration differently.
A verbal promise does not hold up under regulatory scrutiny. Food-approved packaging must be proven in writing, and it is the food business operator – not the supplier – who is ultimately responsible if the paperwork is missing or does not match the product.
Food-approved packaging is not a feeling of security but a documented fact: the right material, tested according to the applicable limit values, and a DoC that follows exactly the article number you actually buy. The difference between a smooth purchase and a stopped batch is almost always determined by the documentation – not by how the packaging looks in the picture in the catalog. Use the checklist below as a practical starting point the next time you are ordering a new type of packaging in glass, plastic or metal. If you would like to review your current packaging portfolio and see where the documentation needs to be supplemented, please contact us at Nordic Pack then we'll go through it together.
We use AI as a tool for research and structure. All content is reviewed, fact-checked and rewritten by Ida Simon-Andersson at Nordic Pack AB — who is responsible for every word published.

Now your quotation request is sent to us and one of our sales representatives will process it and get back to you.
Thank you for showing interest in our products!
Questions about packaging solutions? Do you want inspiration and help from our packaging experts? We are happy to answer questions about packaging in general, and we can also offer more products than the ones you see on the website!
Leave your information and write your question in the form. We normally respond within 24 hours.
