Av Ida Simon-Andersson, HR/Marketing Manager at Nordic Pack AB
A dietary supplement manufacturer that switches to the wrong plastic material risks delayed deliveries and failed inspections in the middle of production. Plastic cans for dietary supplements are about more than volume and price — material selection, sealing, and regulatory compliance determine whether the packaging lasts all the way from factory to shelf. This guide goes through which materials are suitable for different dosage forms, what regulations apply to labeling and content, and what you as a B2B buyer should ask your supplier before placing an order.
Plastic jar dietary supplements must withstand low migration, protect against moisture and light, and meet the requirements of food legislation for contact materials. The most common are PET and PP, as both materials are approved for food and can handle most capsules, tablets and powders without affecting shelf life.
Think of a plastic jar as a small shipping box for fragile goods. It must withstand the shock of shipping, keep out moisture, and at the same time be easy for the consumer to open without the seal coming loose prematurely. Dietary supplements in capsule, tablet, or powder form react differently to moisture and oxygen, making material selection one of the most important decisions in the entire packaging chain.
PET is the most common material for transparent plastic jars and is well suited for capsules and tablets where the customer wants to see the contents. PP can withstand higher temperatures and is often used for powders and products that are filled hot. HDPE is more impervious to moisture and oxygen, which makes the material common for sensitive ingredients such as probiotics and certain vitamins. The choice is in practice guided by four factors: the product's sensitivity to light and oxygen, the filling temperature in production, the requirement for transparency at the retail level and whether the jar should contain recycled material. A typical example is probiotic dietary supplements, where HDPE is often chosen because the material lets less oxygen through than PET.
For those who want to go deeper into the choice of material, it is largely about barrier properties, that is, how well the material keeps oxygen, moisture and light out of the contents. PET has good barrier properties against oxygen but lets through more water vapor than HDPE, which makes the material less suitable for moisture-sensitive powders that will be stored for a long time. PP has a worse barrier to oxygen than both PET and HDPE, but can withstand significantly higher temperatures during filling, which is crucial for products that are filled directly after heat treatment. HDPE combines good moisture tightness with relatively easy processing, but is often slightly less transparent, which can be a disadvantage if the product is to be sold with visible contents in stores. In practice, this means that the right choice of material is rarely about a single "best" option. It is rather about which property weighs most heavily for the specific product — oxygen sensitivity, moisture sensitivity, filling temperature or visual presentation.
A common mistake is to lock in the choice of material based on price or availability without first mapping the product's sensitivity. If a manufacturing company changes the recipe or raw material supplier, the product can suddenly become more sensitive to moisture than before, without the packaging adapting at the same rate. Underestimating how the closure interacts with the material is another common mistake. A tight material in combination with a loose-fitting lid does not provide any real protective effect — it is the entire system of can and lid that determines the barrier property in practice. Waiting to choose the material until late in product development is a third mistake. This means that any problems are only discovered during a pilot batch — then both time and budget often become an obstacle to properly redesigning the packaging solution. Companies that test finished packaging, not just the material itself, usually avoid this type of problem before scaling up production.
Dietary supplements are classified as food in Sweden and are regulated by the same basic rules as food and beverages, with the addition of the product category's specific requirements. The label must, among other things, state the recommended daily dose and a warning against exceeding it, according to Finnish Food Authority, 2023. The product may not be sold in bulk either, but must always be delivered pre-packaged to the consumer. This in practice makes the sealing of the can part of the regulatory requirement and not just a transport issue (Finnish Food Authority, 2025). Food information rules are fundamentally governed by the EU Food Information Regulation, which entered into force in 2011 and remains the legal basis for labelling throughout the EU (Finnish Food Authority, 2024). In addition to the labelling itself, the regulations also set requirements for which nutrition and health claims may be made about the product. A claim that is not in the EU register of approved claims may not be used in marketing or on the packaging, even if the claim is well-established in the industry. For importers of food supplements from countries outside the EU, there are also requirements for contact details. The responsible party within the EU must be clearly stated on the packaging, which is easy to miss when a product is launched quickly in several markets at the same time. You can find more about the general requirements for food-approved packaging in our guide on What is required for packaging to be food-approved in Sweden?.
More manufacturers of dietary supplements want to use recycled materials for environmental reasons, but not all recycled plastic is allowed to come into contact with food. Since the regulation entered into force on 10 October 2022, recycled plastic in contact with food has been governed by a common EU regulation, which requires approved recycling technology, traceability and documented compliance throughout the chain (European Commission, 2022). In practice, this means that a plastic can made from recycled material must be accompanied by a declaration of conformity. It must come from both the recycling company and the manufacturer of the can — otherwise it cannot be sold as food-approved. When the regulation came into force, there were only two approved recycling techniques. PET material has since built up the most established and well-documented recycling chain, while PP and HDPE still have fewer approved alternatives — which is worth asking the supplier about before ordering. The overall packaging regulation at EU level is also gradually raising the requirements for recycled material in packaging up to 2030. This means that more suppliers are already building up documented recycling chains for more material types than just PET. For a manufacturing company that plans long-term, it may therefore be wise to ask the supplier today which material types have a clear plan for approved recycling. It is better than waiting until the requirements become mandatory.
Volume is governed by dosage form and package size on the shelf — a jar of 60 capsules does not require the same diameter as a jar of powder for a month’s supply. Typical volumes for dietary supplements are between 0,1 and 0,5 liters (100–500 milliliters), but larger packages are available for powder-based products such as protein powders or animal supplements. The closure is at least as important as the material: screw caps with induction seals are standard for products that need to be tamper-evident, while child-resistant caps are required for some products with high doses of individual nutrients. A jar that leaks air through the lid will degrade the shelf life of the capsules long before the best-before date, making the closure a quality issue rather than just a convenience detail. The diameter of the jar’s mouth also determines which types of lids and seals can be used, which is worth clarifying early on if the product is to be changed between different dosage forms within the same packaging series later on. For companies that produce several variants of the same product, for example different strengths of the same dietary supplement, it can also be advantageous to standardize the mouth diameter across the entire range. This means that the same cap and the same production line can be used for all volumes in the range. The same principle applies to other product categories — see for example our guide on how to choose the right material, volume and closure for plastic bottles.
It is a question that many manufacturers ask too late — only when a batch is already on its way to the customer. A simple starting point is to test the finished packaging, not just the material itself, since it is the combination of the can and lid that determines the actual barrier effect. Moisture tests during storage at elevated temperature and humidity for a few weeks give a good indication of how the product will behave during actual storage. This is especially true for powders and capsules that are sensitive to moisture. A drop test, where a filled can is dropped from a standardized height, reveals whether the lid will hold its shape after the type of shocks that occur during transport and handling in warehouses. The test should be repeated at several temperatures, because plastic materials become stiffer in the cold and can crack more easily when hit during winter transport. For products with a high value per unit, such as concentrated dietary supplements with expensive active substances, it is also worth testing how the packaging behaves during temperature changes. Condensation inside a leaky can can damage the contents without being visible on the outside. A manufacturing company that has implemented routine moisture testing before launch typically reduces the number of customer complaints related to rancid or moisture-damaged content, as problems are caught before the product reaches retailer warehouses.
The most obvious cost is a withdrawn or delayed batch. The indirect costs are often greater: reworking of labeling, new production run and, in the worst case, a recall if the product has already reached the store or consumer. A faulty closure that is discovered late in the chain can also force a completely new procurement of packaging under time pressure, which rarely provides the best price or best delivery time. There is also a softer cost that is more difficult to calculate. A food company that delivers a product with visible quality defects in the packaging risks losing the trust of both retailers and end customers. An example is a jar that discolors or becomes sticky upon contact with the contents, even if the contents of the dietary supplement itself are completely safe to consume. Spending time on material selection and testing at an early stage is therefore not a delay in production, but an investment that reduces the risk of significantly larger delays further down the chain.
Material selection and regulatory compliance are only half the equation — delivery reliability determines whether production can actually meet its deadlines. Nordic Pack works as a full-service supplier where packaging and logistics are handled as a cohesive business and not just a product order. This means that customers receive both the right material and a reliable supply chain in the same agreement. A typical case is a manufacturing company that needs to repackage larger deliveries in smaller batches ahead of seasonal peaks. A flexible wholesaler with its own warehouse can then significantly shorten lead times compared to direct delivery from the factory. The most common questions B2B buyers ask are rarely just about materials — price, delivery terms, delivery time and minimum order quantity (MOQ) often determine equally whether a procurement goes through. A supplier with its own warehouse in Sweden can usually offer shorter delivery times than a player who orders directly from a factory abroad with each order. This is especially important for companies that do not want to tie up capital in large inventories themselves. MOQ varies greatly between suppliers and materials — standard-sized PET cans often have lower minimum order quantities than custom HDPE solutions, as standard formats are already in stock at the wholesaler. The ability to repackage in stock is especially valuable for seasonal products. A company can then order a larger volume at a better price but still receive deliveries in smaller, more manageable batches spread out over the year. Want to compare plastic jars against other packaging types for B2B, our guide can glass jars for B2B be a good complement.
PET is transparent and is suitable for capsules and tablets that need to be visible in stores. PP can withstand higher temperatures during filling and is often used for powders. The choice depends on the shape of the product and the production process.
Yes, but only if the recycling technology is approved under the EU Regulation on recycled plastics and traceability is documented throughout the chain. PET has the most established approved recycling chain today, while PP and HDPE have fewer approved alternatives.
Powders often require screw caps with induction seals to keep out moisture and oxygen. Some products with high doses of individual nutrients also require child-resistant caps according to current labeling regulations.
Yes. Dietary supplements must be delivered pre-packaged to the consumer and may not be sold in bulk, according to the Swedish National Food Administration's regulations for the product category. This makes the sealing of the packaging part of the regulatory requirement and not just a transport solution.
Material selection, compliance with applicable regulations and a tight seal are the three factors that determine whether plastic food supplement jars work in practice and not just on paper. Recycled material can be used, but only with documented traceability according to EU regulations. And a supplier that handles both packaging and logistics as a whole reduces the risk of delays when production grows. Always test finished packaging — jar and lid together — before scaling a new solution up to full production, so you don't discover problems until the product is already on its way to the customer.
Finding the right plastic jar for dietary supplements is about matching materials, regulatory requirements and supply chain simultaneously and not in sequence. Contact Nordic Pack to review your specific product, volume and schedule and we will help you find a solution that lasts all the way to the customer.
We use AI as a tool for research and structure. All content is reviewed, fact-checked and rewritten by Ida Simon-Andersson at Nordic Pack AB — who is responsible for every word published.

Now your quotation request is sent to us and one of our sales representatives will process it and get back to you.
Thank you for showing interest in our products!
Questions about packaging solutions? Do you want inspiration and help from our packaging experts? We are happy to answer questions about packaging in general, and we can also offer more products than the ones you see on the website!
Leave your information and write your question in the form. We normally respond within 24 hours.
